Ubiquiti - Mike Tabor

My VMware ESXi Home Lab Upgrade

February 1, 2019February 7, 2019 Home Lab

Although the focus in my career right now is certainly more cloud focused in Amazon Web Services and Azure, I still use my home lab a lot.

For the last 5+ years my home lab had consisted of using 3x Intel NUC’s (i5 DC53427HYE), a Synology NAS for shared storage and an HP ProCurve switch. This setup served me well for most of those years. It has allowed me to get many of the certifications I have, progress in my career and have fun as well.

At the start of this year I decided it was time to give the home lab an overhaul. At first I looked at the newest generation of Intel NUC’s but really wasn’t looking forward to dropping over $1,300 on just partial compute (I’d still need to be RAM for each of the 3 NUC’s). I also wanted something that just worked, no more fooling around with network adapter drivers or doing this tweak or that tweak.

I also no longer needed to be concerned about something that had a tiny footprint. I also questioned if I really needed multiple physical ESXi hosts. My home lab isn’t running anything mission critical and if I really wanted I could always build additional nested VMware ESXi hosts on one powerful machine if I needed.

So in the end, the below is what I settled on. Replacing all of my compute, most of my networking and adding more storage!

How to enable SSH auto login on Ubiquiti EdgeRouter X

January 31, 2017February 3, 2017 Home Lab

5 Comments

SSH key authentication not only provides a more convenient way to logging into your EdgeRouter X, but is also more secure because the private key replaces the need of a password and thus is typically more difficult to brute force.

The below steps will show how to generate a SSH key, add it to the router, and then disable password authentication so that only the key-pair can be used to login.

Running Ubiquiti UniFi controller in Docker on Synology NAS

September 13, 2016December 31, 2018 Synology

43 Comments

Recently I posted how to run the Ubiquiti UniFi Controller in the cloud using services like Linode, Vultr, or DigitalOcean. However, a few people has asked if I could post instructions on how to run the UniFi controller in Docker, similar how I have CrashPlan running in Docker.

For the steps below I’ll be using my Synology DS1815+ NAS which is compatible to run Docker. If you’re unsure if your model support docker or not you can check here.

How to install Ubiquiti UniFi controller on the cloud

August 1, 2016September 18, 2018 Home Lab

24 Comments

Recently I replaced my wireless router, an Asus RT-AC66U, with an Ubiquiti EdgeRouter X router and Ubiquiti UAP-AC-LR access point. Both of which are a HUGE step up over traditional consumer wireless routers.

The Ubiquiti access points use software called the Ubiquiti UniFi controller to configure and control the access points which can be installed locally or in the cloud – allowing you to manage the access points no matter where they are located.

To automate the install process, I created a simple script to deploy the Ubiquiti UniFi Controller in the cloud on a Ubuntu server, and have also tested the script on three popular VPS providers: Linode, Vultr, and DigitalOcean – all three worked perfectly!