Restore a VM using the {vm}-flat.vmdk file

VMware

missing vmdk file error

A couple days ago I was asked the question “An admin deleted the vmdk file associated with a VM, there are no snapshots or backups of the VM . Can we restore this VM somehow?“. I believe in backups, I like to have my VM’s backed up so that I can depend on them for events just like this very issue. At first I was stumped, until the {vm-name}.flat.vmdk was mentioned. That’s when I remembered a method to recover a VM using the vm-flat.vmdk file that I had actually done 2-3 years ago.

Example preparation

For this example I’ve created a Server 2012 virtual machine (called Win2012) and placed a text file on the desktop called “Important Info”. I then deleted all the files associated with that VM with the exception of the Win2012-flat.vmdk file, as seen in the image at top.

VM before deleting VMDK file

After the files had been deleted I tried to power up the VM knowing it would not and received this error.
missing vmdk file error

Ok, now on to how to restore a VM with a missing .VMDK file.

How to Recover a VM using a vm-flat.vmdk file

  1. I created a new VM called Recovery with the same specs as my Win2012 server (2vCPU, 4GB RAM, 40GB HHD).
  2. Enable SSH on the host and logged in via PuTTy (or WinSCP) and verified the contents of Win2012 folder: 
    cd /vmfs/volumes/vmNFS02/Win2012/

    win2012 folder contents

  3. Then navigate to the Recovery VM folder. 
    cd ../Recovery/
  4. Rename the original Recovery-flat.vmdk file to Recovery-flat.vmdk.bak 
    mv Recovery-flat.vmdk Recovery-flat.vmdk.bak

    copy recovery-flat.vmdk

  5. Now just copy the Win2012-flat.vmdk file from the Win2012 folder over to the Recovery folder (Note: This step could take several minutes): 
    cp /vmfs/volumes/vmNFS02/Win2012/Win2012-flat.vmdk Recovery-flat.vmdk

    copy flat vmdk to recovery folder

  6. Finally, power up the new Recovery VM and your old VM (Win2012) should be back online good as new!
    after restore
  7. You can also go back and delete the Recovery-flat.vmdk.bak file as it won’t be needed.

So even though restoring a VM from a -flat.vmdk file is pretty easy it isn’t my recommended method, you’re far better protected with good, reliable backups, then on hoping that the -flat.vmdk file is still laying around somewhere.

Similar Posts

  • Install ESXi 5.1 from a USB Flash Drive

    VMware
    1 Comment

    Many servers already come with a DVD/CD-ROM drive or some kind of ability to virtually mount an ISO image from a network share onto your server to then install ESXi. However, not all do or you just want to have your ESXi image readily available. Here’s a quick step by step instructions on how to use a USB flash drive to install ESXi.

    1. Download ESXi 5.1 from VMware (if you haven’t already) as well as UNettbootin.
    2. Plug in your USB Flash Drive.
    3. Open UNetbootin and select “Diskimage”, set Type to “USB Drive”, select Drive letter of your USB flash drive, and set the path of your ESXi 5.1 ISO image. Then click on “OK”.
      unetbootin setup

      4. Read More “Install ESXi 5.1 from a USB Flash Drive”

  • VMware’s Dual Persona smartphones now available at Verizon Wireless

    VMware
    0 Comments

    VMware Ready for Verizon

    VMware has announced that the Android running LG Intuition and Motorola Razr M can now both be purchased with VMWare Horizon Mobile software. The VMWare Horizon Mobile software separates the devices into isolated partitions that allow users to keep their work applications and data separate from their personal applications and data.

    Today, VMware and Verizon Wireless announced that the Android-based LG Intuition and Motorola Razr M can now be purchased with VMware’s Horizon Mobile software, which separates the device into isolated partitions that keep a user’s work applications and data separate from personal stuff. Licenses to Horizon Mobile start at $125 per user and can be purchased through local resellers of VMware and Verizon Wireless.

    Read More “VMware’s Dual Persona smartphones now available at Verizon Wireless”

  • VMware View client now availabe for Android!

    VMware
    0 Comments

    VMware has announced that they have released a View Client for Android tablets available on the Android Market now. Here are just a few of the features found on the new client.

    • A new look and feel – The View Client for Android features the NEW blue look and feel of the VMware View clients!
    • Multiple broker support – If you have more than one VMware View broker in your organization, you can can easily access your desktop from all of them via the Android client
    • Desktop Shortcuts – Quickly connect with as many as four recent desktop via shortcuts
    • Virtual trackpad – Control your desktop on a granular level just like you would control the mouse on a laptop
    • Custom keyboard toolbar – Super easy access to all of the special keys not found on the Android default keynboard
    • Honeycomb 3.x support – Made from the ground up for the new generation of Android tablets
    • Custom gestures – Invoke keyboard, scrolling, etc are as easy as ever and simple to use
    • VMware View Security Server support (best experience) – No need to have VPN when you use VMware View Security Server
    • Background tasking – Switch between apps on your tablet and come right back

  • Upgrade ESXi host to ESXi 5.5 using VMware Update Manager 5.5

    VMware
    2 Comments

    A while back I wrote about how to upgrade to ESXi 5.5 via command line which works great when you only have a few hosts as each host has to download the ISO from the web each time. This time I’ll show you step by step how to upgrade your ESXi 5.1 host to ESXi 5.5 using VMware Update Manager 5.5 (aka VUM).

    For this post I’m going to assume you have already upgraded your vCenter and VUM to versions 5.5 as well as the VUM plugin installed. So lets begin!

    Upgrade ESXi host to 5.5 using VMware Update Manager (VUM)

    1. Open the vSphere client and click on Update Manager
      VMware Update Manager icon

    Read More “Upgrade ESXi host to ESXi 5.5 using VMware Update Manager 5.5”

  • VMware ESXi 5 home lab upgrade

    Home Lab, VMware
    54 Comments

    In the past I’ve been using a single server to run my VMware ESXi home lab. it was slow, old, big and loud. I’ve been meaning to upgrade my home lab for a while and just never got around to it, until now! When looking for new hardware I wanted the servers to be as compact as possible, quiet, and low energy usage as possible while still having some horsepower.

    I debated on going the whitebox solution as I build all my own desktops anyway, I also looked at several other solutions such as the HP ML310e server, Shuttle XH61V barebones machine, but ultimately decided to go with two Intel NUC i5’s.

    Intel NUC i5 and 16GB ram

    Intel NUC i5 DC53427HYE Features:

    • Uses very little energy
    • Completely quiet
    • Supports up to 16GB RAM
    • A dual core CPU that scores nearly 3,600 in PassMark benchmarking
    • Includes vPro which allows me to easily run both NUC’s headless
    • Extremely small, nearly 4 1/2″ inch square footprint

    Read More “VMware ESXi 5 home lab upgrade”

Leave a Reply to Michael Cancel reply

Your email address will not be published. Required fields are marked *

34 Comments

  2. Hi,

    Thanks for the above post :)

    I’m try your post in my home lab but I’m facing the below
    issue . can you please help me to understand the concept .

    I have created a new VM called win7 then logged into the ESXi 5.0 via SSH (putty ) I can view the win7-flat.vmdk
    file but if I delete the win7.vmdk file I can’t see the win7-flat.vmdk . because
    of this I’m not able to perform your post in my lab can you please help me understand
    the concept please and please guide me if I’m wrong

    Reply

    1. viswa,

      How are you deleting the .VMDK file? If
      removing the VM from disk it will in fact remove all files and folder
      associated with the VM. If you’re browsing the VM folder on the
      datastore and delete the .VMDK file then the {vm}-flat.vmdk file should
      still exist.

      Reply

      1. Hi Michael,

        Thanks for your help :)

        How are you deleting the .VMDK file?
        Ans : I’m browsing the VM folder in data store and deleted the
        win7.vmdk file . after that i’ve checked ssh to ESXi via putty i’m not able to view the both Vmdk and flat.vmdk files

      2. viswa,

        Sounds like you’re deleting it from the GUI datastore browser. I deleted the file from SSH. Not sure if that might be the issue or not, but i will try it when I get home this evening on my home lab as well.

        If you want to test now you could spin up a new test VM, SSH to the VM folder and delete everything but the {vm}-flat.vmdk file and try the rest of the steps.

  3. Pingback: Restore a VM using the {vm}-flat.vmdk file | Iron Castle Systems

  4. Hi i have this problem in real VM , i do these note but my machine isn’t work.
    i work with gui datastore browser.plz help me :(

    Reply

  5. Thank you very must you saved me, after the material virtual update 9 to 10, the DIsk 1 size take 0 MB (usual 50 GB)
    In a friday (newer do a action on prod a friday ! -but the deadline – grrrrr)

    Imagine I give a virtual Beer ;-) sluurps :)

    From France.

    Reply

  6. This worked like a charm! Thanks a million! This was a life saver. I was able to recover my Lync 2013 Server with no issues using these instructions. Straight forward and clear.

    Reply

  7. Hi Mike, do you have an article I can use to get my Datastore (from Synology iSCSI Target) to show up on my VMware host again? I am able to connected successfully and see it mounted but I no longer see the Datastore from Synology showing up on my ESXi Hosts. Thanks!

    Reply

    1. Hector,

      I don’t have an article for mounting iSCSI targets from Synology to VMware but wouldn’t mind creating one. If you’ve already had this configured at one time then it makes me wonder what has changed since? Also have you tried to do a storage rescan?

      -Michael

      Reply

  8. hi mike, iam download vm files from one datastore to another data store, I notice that i click download from datastore on my local drive, file is downloading but file name appears on my local drive is myvm-flat.vmdk, why the flat added in it? how can i send you private message or skype? i want to share my screen shots with you

    Reply

  10. Thank you, thank you, thank you
    You saved my server, did not have any current backups because it was temporary, but SAP consultants never released it.
    Great job and article

    Reply

  13. How do you find the location of the VM to type it in the “cd /vmfs/volumes/vmNFS02/Win2012” command?

    I am pretty new at this and somehow my vm server had a “bootstrap device not found” error, things got complicated from there — I tried recreating the VM and using the disks of the bad VM, but that gave me another error (bootmgr not found) and even then after using chkdsk tools it went worse.

    I do have the flat.vmdk file for the original VM but nothing else – it seems it is the right size.

    I am not sure how to find the location of that to type in the above command. PLEASE, help!

    Thanks a lot.

    Reply

  16. Ref: Hi mike, Im download vm files from one datastore to another data store, I notice that i click download from datastore on my local drive, file is downloading but file name appears on my local drive is (myvm-flat.vmdk) this is a backup file from in esxi virtual harddisk

    Another way to save te info when we get a -flat.vmdk file, is with power iso, this app can open te file .vmdk as it was a .rar file and extract the needed files and folders.

    Thanks to you and and other soulds that saved my day and night and 3years of works!

    Reply