VMware delta exam VCP550D… Passed!

VMware delta exam passed

Over the weekend I decided to go ahead and take the VMware Delta VCP550D Exam since my VCP5 was set to expire in March of 2015 due to VMware’s new recertification policy. Even managed to pass it with a fairly decent score of 460 (300 is the minimum to pass). Below I’ll share some of my notes prior and after the exam.

Studying for VCP550 VMware Delta Exam

Back in October when I posted the news about the VMware Delta Exam, a reader asked in the comments what the differences between the VMware 5.1 DCV and 5.5 DCV blueprints were and I replied with a number of differences that stood out to me:

  • Identify vCenter Server and vCenter Server database requirements Deploy the vCenter Appliance
  • Upgrade a vSphere Distributed Switch
  • Upgrade from VMFS3 to VMFS5
  • Upgrade VMware Tools
  • Upgrade Virtual Machine hardware
  • Upgrade an ESXi Host using vCenter Update Manager
  • Secure vCenter Server and ESXi (Objective 1.5)
  • Configure and Administer Software Defined Storage (VSAN – Objective 3.3) Enable/Configure/Disable Host Power Management/Distributed Power Management Create/Delete vFlash Resource Pool
  • Assign vFlash resources to VMDKs
  • Install and Configure VMware Data Protection
  • Create a backup job with VMware Data Protection
  • Install, Configure and Administer vCenter Operations Manager (Objective 7.3)

After taking the VMware Delta Exam I can say this is a VERY good list to study by. I received questions in nearly each of the above subjects along with several of the “general” VCP-DCV exam questions.

Another suggestion I would make would be to take a look at the Pluralsight videos:

Pluralsight offers cheap monthly plans and by using this link you can get a Free 10-day trial!

Overall it felt a lot like taking the VMware VCP-DCV exam all over again, though just a few less questions and shorter time frame to complete as the Delta Exam is 65 questions in 75 minutes vs 85 questions in 90 minutes. I believe I finished the Delta Exam with just about 20 minutes to spare.

If you’re thinking about taking the exam to renew your VCP certification then you better get to it as the Delta exam is only available to take up till November 30, 2014, March 15, 2015, May 8, 2015 so time is of the essence. Get the test registered and get to taking it!

Good luck!

UPDATE: The VCP550 Delta exam has been brought back and is now available to take until March 10, 2015!

UPDATE #2: The VCP550 Delta exam has again been extended, now available until May 8th, 2015!

Similar Posts

  • VMware vCenter Server 5.5.0a update released

    VMware has released an update to vCenter 5.5 Server. The new updated, numbered 5.5.0a doesn’t appear to add any new features but instead focus on squishing a number of bugs in the 5.5 version – mostly around vCenter Single-Sign-On and the vSphere web client.

    Issues resolved with this release are as follows:

    1. Attempts to upgrade vCenter Single Sign-On (SSO) 5.1 Update 1 to version 5.5 might fail with error code 1603
    2. Attempts to log in to the vCenter Server might be unsuccessful after you upgrade from vCenter Server 5.1 to 5.5
    3. Unable to change the vCenter SSO administrator password on Windows in the vSphere Web Client after you upgrade to vCenter Server 5.5 or VCSA 5.5
    4. VPXD service might fail due to MS SQL database deadlock for the issues with VPXD queries that run on VPX_EVENT and VPX_EVENT_ARG tables

    Read More “VMware vCenter Server 5.5.0a update released”

  • How to fix vRealize Orchestrator 6 appliance, weak ephemeral Diffie-Hellman key

    vrealize orchestrator chrome error

    I’ve recently deployed the vRealize Orchestrator appliance (6.0.2) and noticed right away that my default browser Firefox, would not load the Orchestrator appliance web panel. Firefox always complained about a weak Diffie-Hellman key.

    An error occurred during a connection to ip-address:8281. SSL received a weak ephemeral Diffie-Hellman key in Server Key Exchange handshake message. (Error code: ssl_error_weak_server_ephemeral_dh_key)

    At the time I simply ignored it and just tried Google Chrome which it worked fine. That was until the latest release also broke with the same type of error message:

    Server has a weak ephemeral Diffie-Hellman public key“.

    I now had a problem and contacted VMware support, below is the very easy fix to make vCO 6 work in both the latest version of Firefox and Chrome!

    Read More “How to fix vRealize Orchestrator 6 appliance, weak ephemeral Diffie-Hellman key”

  • Upgrade VCSA 6.5 to VCSA 6.7 Update 1

    VMware vCenter 6.7 U1 has recently been released. Last week I posted how to upgrade VCSA 6.7 to 6.7 Update 1, this post will walk you though upgrading VMware vCenter Server Appliance 6.5 to VCSA 6.7 Update 1!

    When doing a VCSA version upgrade the upgrade process is much different, than going from say 6.7 to 6.7 U1. When going from 6.5 to 6.7 the upgrade is actually broken up into two stages.

    The first stage involves deploying a brand new vCenter 6.7 appliance. Then the second stage will copy the data from your 6.5 VCSA into the newly deployed 6.7 VCSA from stage 1.

    Read More “Upgrade VCSA 6.5 to VCSA 6.7 Update 1”

  • VMUG EVALExperience, the new VMware VMTN

    VMUG EVALExperience

    Long ago VMware offered a program called VMware Technology Network (VMTN) which was very similar to Microsoft’s TechNet, which allowed you to download and run various VMware software within your home lab for a small yearly fee. Just like the Microsoft TechNet, the VMware VMTN program was eventually closed. From the time the VMTN program closed many people have begged and pleaded with VMware to bring the program back, there is even a long forum thread asking VMware to bring VMTN back. Though it never did… until now.

    Read More “VMUG EVALExperience, the new VMware VMTN”

  • Clone VMware ESXi USB boot drive to another USB flash drive

    A few days ago one of my hosts in my home lab was displaying an alarm message:

    Lost connectivity to the device

    Lost connectivity to the device mpx.vmhbaXX:XX:XX:XX backing the boot filesystem /vmfs/devices/disks/mpx.vmhbaXX:XX:XX:XX. As a result, host configuration changes will not be saved to persistent storage.

    The last part of the message (“persistent storage”) made me think it might have something to do with the USB drive due to the fact that a similar message appeared when setting up the home lab on the Intel NUC’s. After some research it appears my assumption was correct and that the USB flash drive I was using to boot from was indeed starting to fail.

    Read More “Clone VMware ESXi USB boot drive to another USB flash drive”

  • VMware Workstation 8.0.4 released

    VMware has just released it’s forth minor update for VMware Workstation 8, bringing it up to 8.0.4. The looks to contain mostly a few bug and security fixes.

    General Issues

    • Linux guests running the Linux kernel version 2.6.34 or later could not be pinged from the host via an IPv6 address.
    • On rare occasions, Linux guests would suddenly fail to Autofit or enter Unity.
    • Unity mode would exit if the title bar of an application contained certain non UTF-8 encoded extended ASCII characters.
    • On Windows hosts, the VMware Workstation user interface sometimes became unresponsive when minimized from full-screen mode if the suggestion balloon was being displayed.
    • On Windows hosts, the user interface sometimes became unresponsive if the application was rendered on an extended display that was abruptly disconnected.

    Read More “VMware Workstation 8.0.4 released”

Leave a Reply to Michael Cancel reply

Your email address will not be published. Required fields are marked *

24 Comments

  1. Thanks for sharing your experience.

    Would you know if we will be able to schedule VCAP-DCA [VDCA550] exam if VCP510 expires ?!!

    1. Asim,

      You are most welcome. I hope I’m able to help many people with this post.
      Thank you for the correction on the date. I’ve updated the post to show the correct date instead of the 15th.

      -Michael

  2. Hi, can I ask if this is a online exam? If yes, stupid question but how do they know you don’t have a home lab next to you lol….so you can check your right as you go along!

    1. Matthew,

      The Delta exam is an online exam, meaning you can take it from home and do not have to go into a Pearson VUE testing facility to take the exam. That said the types of questions asked I don’t feel having a home lab at the ready would really help you all that much during the exam. So long as you are familiar with the list I posted above you really don’t need anything more than that, but that’s just in my opinion.

      -Michael

  3. Today I have just made a request for the VCP 5.5 Delta exam for my re-certification, how come the only available exam dates given by Pearson is 2-Feb-2015? I thought it’s available till 10-March-2015. Any clue on this?

    1. you have 48 hours to take the exam once you pay for it so if you are not ready wait. The first time I did this I did not read the dialogue and it informed me I had not taken within the time-frame..

  4. Just passed the VCPD550 a hour ago. They must have just changed the date to May 8th. Cause it was March 10th yesterday, but o well. My certification was good to December. Now I’m good for another 2 years.

  5. Hi Mike, I wonder if we still receive a paper certificate and a VMware Workstation license if we pass the VCP550D exam; I di my exam in the first week of February and haven’t received anything until now.

    1. Gerdi

      No, you won’t get a paper certificate as this exam is just renewing your previous VCP exam. You can log into your VMware MyLearn portal and print a new certificate of your VCP which will also show the updated expiration date (or VALID THROUGH date).

      Also, VMware is not giving free Workstation licenses for the VCP550D exam as they did in the “full” VCP exam.

      -Michael

  6. Hey Michael. Thanks for all your help I know I’ve been bothersome lately but if it wasn’t for you I wouldn’t have gotten this far! So another question I have is, can I use esxi 6.0 for a lab and still study for esxi 5.5 test? I have an evaluation for 6.0 right now and want to use it before it runs out. Thanks again

    1. Absolutely no bother at all my friend!

      Ideally it would be best to use a 5.5 lab to study by but vSphere 6.0 isn’t so ground breaking different compared to 5.5 that I believe it wouldn’t cause a huge deal to use 6 as a study for 5.5.

      Then again, if you’ve got a vSphere 6 lab is there any reason why you’re not just taking the VCP6 exam instead of 5.5?

      -Michael

      1. Yes there is a big reason LOL. $$$. My company has already sent me to the VMWare 5.5 installation class. In order to take 6.0 I would have to go to a whole new class. I wish I didn’t have to because I think its better to learn whats new. I love technology but not enough to burn that much of a whole in my pocket.

  7. Here we present on this most promising occasion. We promised to you that your will pass your certification in first attempt by the help of our dumps. Here we present 20% discount on dumps. What are your waiting for? Avail this offer and pass your exam in first attempt. We provide you 100% passing assurance. Visit us and get latest and accurate dumps. For discount use this coupon code. “VAL20”
    VCP550D Practice Test