Upgrade vCenter Server Appliance 6.0 to 6.5

VMware

VMware vSphere 6.5 has been released as general available and earlier this week I posted about Installing VMware vCenter Server Appliance 6.5 as a new install, this post will walk through upgrading an existing vCenter Server Appliance 6.0 to 6.5!

Similar to a fresh VCSA 6.5 install, the VCSA 6.5 upgrade is also broken up into two stages. The first stage is deploying a new vCenter Server Appliance and the second stage is copying data from the 6.0 VCSA to the newly deployed 6.5 VCSA.

How to upgrade vCenter Server Appliance 6.0 to 6.5

If you haven’t already, go ahead and download the VCSA 6.5 ISO and lets get started. It’s also a good idea to check the VMware Interoperability Matrix before performing any upgrade.

Stage 1 – Deploying vCenter Appliance 6.5

  1. Mount the ISO and start the vCenter Server Appliance 6.5 installer located at \vcsa-ui-installer\win32
    vcsa installer install
  2. Select Upgrade from the VMware vCenter Server Appliance 6.5 Installer.
    vcsa 6.5 upgrade
  3. The introduction shows what I stated above, that the VCSA Upgrade is broken up into two stages – deploy and then copy data. Click on Next.
    vcsa 6.5 upgrade intro
  4. Accept the End User Licence Agreement.
    vcsa 6.5 upgrade eula
  5. Enter the FQDN or IP of your existing 6.0 VCSA as well what host the existing VCSA resides on, along with all the login credentials.
    vcsa 6.5 upgrade source
  6. Now enter the ESXi host you want the new VCSA 6.5 appliance to be deployed.
    vcsa 6.5 upgrade deployment target
  7. Enter the name you would like for the appliance VM to be called as well as set a root password.
    vcsa 6.5 upgrade target appliance
  8. Next, select the deployment size that best matches your environment. For the home lab I’m selecting Tiny.
    vcsa 6.5 upgrade deployment size
  9. Select what datastore you want the VCSA 6.5 appliance to be stored.
    vcsa 6.5 upgrade datastore
  10. Configure a TEMPORARY network identity. Once Stage 2 of the upgrade has been completed the 6.5 VCSA will take the network identity of the old existing VCSA.
    vcsa 6.5 upgrade network
  11. Review the summary and click on Finish.
    vcsa 6.5 upgrade review
  12. Once completed you will have the option to continue onto Stage 2 of the upgrade or close. If you close then you can finish the VCSA config by going to https://<TEMP_VCENTER_IP>:5480
    vcsa 6.5 upgrade stage1 complete

Stage 2 – Copying data to VCSA 6.5

  1. After clicking Continue from Stage 1 you will be taken to the Stage 2 Upgrade introduction page, click Next.
    vcsa 6.5 upgrade stage2 intro
  2. Confirm the source vCenter Server and ESXi host. This will be pre-populated from Stage 1 unless you closed the Upgrade after Stage 1, then you’ll need to re-supply this info. So just click on Next.
    vcsa 6.5 upgrade stage2 source vcenter
  3. A pre-upgrade check will then run and show it’s results. Below you’ll see the pre-upgrade tells us we should turn off Fully Automated DRS on the cluster where vCenter Server resides.
    vcsa 6.5 upgrade stage2 pre-upgrade result
  4. Select what data you would like to migrate from the existing VCSA 6.0 deployment to the new VCSA 6.5. For my home lab I’m not concerned about all the tasks or performance metrics and will only copy the Configuration data.
    vcsa 6.5 upgrade stage2 upgrade data
  5. Check or un-check if you would like to join the Customer Experience Improvement Program (CEIP) and click Next.
    vcsa 6.5 upgrade stage2 ceip
  6. Again review the summary and check “I have backed up the source vCenter Server and all the required data from the database” and click Finish.
    vcsa 6.5 upgrade stage2 ready complete
  7. You’ll receive a notice telling you that the existing VCSA 6.0 appliance will be shut down and it’s network identity will be enabled on the new VCSA 6.5 upgrade.

    This is nice as the upgrade does NOT delete your old vCenter Server 6.0 appliance and instead just powers is off. In case something goes wrong you can power off the new vCenter Server 6.5 appliance and power up the 6.0 appliance.

    Click on OK.
    vcsa 6.5 upgrade stage2 source shutdown message

That’s it! If all goes well and after a few minutes the vCenter Server Appliance upgrade should complete and you should see the following screen.

vcsa 6.5 upgrade stage2 completed

Simply log into the web client by going to: https://<VCENTER_IP>/vsphere-client and start enjoying vCenter Server 6.5!

If you would like more details about vSphere 6.5 check out the VMware vSphere 6.5 release notes here.

Similar Posts

  • Set default printer for View floating desktop and Persona Management

    VMware
    5 Comments

    Sometime ago I asked a question over at the VMware forum about how to set default network printers on a VMware View 5.0 floating pool that used Persona Management as Persona Management wasn’t keeping this user setting on it’s own. The printers would be added to the VM just not remember the default printer setting. I’ll admit I forgot to update the thread, but a work around was devised which I’ll share below.

    Read More “Set default printer for View floating desktop and Persona Management”

  • Thank you VMware Community!

    VMware
    0 Comments

    VMware vExpert 2014

    So far, 2014 has been a very rewarding year for a number of reasons, two of which has happened in just a week or two span. First, Eric Siebert (@ericsiebert) announced on March 27th, this years results of the 2014 Top VMware & Virtualization Blog voting. My first year entered into voting and made it to 71st place! A huge thanks goes out to not only Eric but just as much so to everyone who voted for me!

    To top it off, yesterday VMware announced 2014’s first quarter VMware vExpert list. While vExpert isn’t a technical certification or even a general measure of VMware expertise. The VMware judges selected people who were engaged with their community and who had developed a substantial personal platform of influence in those communities. There were a lot of very smart, very accomplished people, even VCDXs, that weren’t named as vExpert this year. VMware awarded this title to 754 people this year and on that list of many impressive names you’ll find yours truly, Michael Tabor!

    I’m both honored and humbled by both lists. It’s a great feeling to be recognized by not only my peers through the voting in the Top vBlog but also by VMware themselves through the vExpert title.

    So again THANK YOU very much to the entire VMware community, a spectacular community indeed, and congratulations to everyone else that made the Top vBlog and vExpert lists!

  • Easy ESXi 6.0 upgrade via command line

    VMware
    1 Comment

    VMware has released ESXi 6.0 back in March and I recently posted a guide on how to upgrade your vCenter Server Appliance from 5.x to 6.0 – Now we’re going to look at two ways to upgrade a VMware ESXi 5.x host to ESXi 6.0 via command line.

    The first method will show you how to have each ESXi host download the update directly from VMware and then upgrade itself while the second method shows how to download the update, place it on a datastore accessible to the host, then upgrade the host.

    Read More “Easy ESXi 6.0 upgrade via command line”

  • VMware View client now availabe for Android!

    VMware
    0 Comments

    VMware has announced that they have released a View Client for Android tablets available on the Android Market now. Here are just a few of the features found on the new client.

    • A new look and feel – The View Client for Android features the NEW blue look and feel of the VMware View clients!
    • Multiple broker support – If you have more than one VMware View broker in your organization, you can can easily access your desktop from all of them via the Android client
    • Desktop Shortcuts – Quickly connect with as many as four recent desktop via shortcuts
    • Virtual trackpad – Control your desktop on a granular level just like you would control the mouse on a laptop
    • Custom keyboard toolbar – Super easy access to all of the special keys not found on the Android default keynboard
    • Honeycomb 3.x support – Made from the ground up for the new generation of Android tablets
    • Custom gestures – Invoke keyboard, scrolling, etc are as easy as ever and simple to use
    • VMware View Security Server support (best experience) – No need to have VPN when you use VMware View Security Server
    • Background tasking – Switch between apps on your tablet and come right back

  • VMware vCenter Server 5.5.0a update released

    VMware
    0 Comments

    VMware has released an update to vCenter 5.5 Server. The new updated, numbered 5.5.0a doesn’t appear to add any new features but instead focus on squishing a number of bugs in the 5.5 version – mostly around vCenter Single-Sign-On and the vSphere web client.

    Issues resolved with this release are as follows:

    1. Attempts to upgrade vCenter Single Sign-On (SSO) 5.1 Update 1 to version 5.5 might fail with error code 1603
    2. Attempts to log in to the vCenter Server might be unsuccessful after you upgrade from vCenter Server 5.1 to 5.5
    3. Unable to change the vCenter SSO administrator password on Windows in the vSphere Web Client after you upgrade to vCenter Server 5.5 or VCSA 5.5
    4. VPXD service might fail due to MS SQL database deadlock for the issues with VPXD queries that run on VPX_EVENT and VPX_EVENT_ARG tables

    Read More “VMware vCenter Server 5.5.0a update released”

Leave a Reply to Squuiid Cancel reply

Your email address will not be published. Required fields are marked *

27 Comments

  1. Thank you

    I got an error on 50% of coping source vCSA and after shutdown source vCSA 6

    error saying Invalid IP Adress/Prefix provided 192.168.0.114/24/255.255.255.0

    Failed to set network

    Reply

  2. This IP is for the source seems an issue happend when set target vCSA network with source vCSA after shut it down !!!!

    Any advise .

    Thank you

    Mag

    Reply

  3. One question, it states to pick a new name for the 6.5 VCSA but i need to have the system named the same as the old one. Can i use the same name as the old one OR do i have the ability to rename the new 6.5 VCSA once the upgrade is complete ?

    Reply

    1. No you can’t use the same name during the upgrade/migration. You wanted you could rename the machine and host name once you renamed the original vCenter.

      Reply

      1. Michael, could you elaborate on what you mean? I’m not quite following you.
        It is beyond belief that when carrying out an UPGRADE you can’t use the same VM name.

      2. @Squuiid:disqus that’s because upgrading the VCSA isn’t an “upgrade” in the sense of the word. In reality what’s going on during a VCSA upgrade is a new VCSA appliance is deployed and all your data is copied to it. In reality it’s actually a migration.

  5. Hello,
    When i get to step 7 i can only select X-Large, The other deployment options are not visible.
    Do you know how i can make a Tiny one?
    Thank you

    Reply

    3. I had this issue and I cleaned out some log files to get more space (/storage/log). I ran the upgrade again and I had all of the options.

      Reply

  6. Worked like a charm.. thanks for the help, Had appliance 6.0 U2 and the upgrade was as explained in this website… Keep up the good work..

    Reply

  7. How does the VUM data get pulled into the VCSA 6.5 or is this a separate issue? Currently have VUM running on a Windows Server VM.

    Reply

    1. you will be asked to run migration assistant on VUM Windows machine during upgrade to VCSA 6.5.
      Migration assistant is folder on VCSA 6.5 ISO, copy folder to VUM Windows machine and run before upgrade

      Reply

  8. This was very helpful, thanks! The only hangups I ran into were:
    1. My root (OS account) on the old 6.0 VCSA had to be changed before I could use it. It must expire without actually being expired. I was able to log in with it via the vmware console but the upgrade process kept complaining about it. Once I logged into the console and change the password it was fine.
    2. I had a windows VUM server and needed to copy the migration-assistant folder from the VCSA 6.5 ISO to my VUM host and then run vmware-migration-assistant.exe before the upgrade process could complete.

    Reply

  9. when performing VCSA upgrade from vCenter Server 6.0 U3b to vCenter Server 6.5.0d
    I have pre-upgrade checks error and cannot continue with upgrade.

    “The source machine hostname ‘localhost’ resolves to IPv6 address(es) ‘::1’, but IPv6 networking will not be preserved after the upgrade. This will prevent certain services preferring IPv6 from establishing network communication.
    Resolution
    Either remove the DNS IPv6 entry for hostname ‘localhost’ or change the network configuration of the source machine to pure IPv6 or in case dual networking stack is needed, set a static IPv6 address.”

    I have disabled ipv6 via DCUI, disabled ipv6 config in /etc/hosts file. Nothing helps

    Reply

      1. so with 6.5U1 which supports upgrade from 6.0U3 I have upgrade error:
        The source machine hostname ‘localhost’ resolves to IPv6 address(es) ‘::1’, but IPv6 networking will not be preserved after the upgrade. This will prevent certain services preferring IPv6 from establishing network communication.
        Resolution

        Either remove the DNS IPv6 entry for hostname ‘localhost’ or change the network configuration of the source machine to pure IPv6 or in case dual networking stack is needed, set a static IPv6 address.

      1. @arkadiyshapiro:disqus see my reply above and view the VMware Matrix. Upgrading from vCenter 6.0 U3 to 6.5 is not supported at this time.

      2. Ok i think for me it was just hostname was not configured on vCenter, but the error is surely confusing to figure out that this is what i may need to do to fix.

  11. I couldn’t continue with stage 2 at that specific time of stage 1 completion. I had to resume almost 12 hours later. Now I can’t finish stage 2 unable to authentication root user. I did not close but I am able to move forward. I attempted to go in through “https://:5480” and it does say that additonal steps (i.e. transfer configuration, etc) but there also I get an unable to authenticate.

    Reply

  13. Mount the ISO and start the vCenter Server Appliance 6.5 installer located at \vcsa-ui-installer\win32 – I have querey here in order to start Here could you please tell me which machine you have used . Is there any machine which is running windows /2012 or your using your Laptop .. Am having a confusion here where we need to mount the ISO & start .. Since I don’t have VUM server.

    Reply